2016 MAN E2842 E312 Natural Gas Generator Set – CHP | 250 kW | 1,500 rpm

MAN E2842 E312 stationary natural gas engine configured as a combined heat and power (CHP) gen-set unit, installed in an enclosed acoustic canopy within a dedicated machine room. The unit presents in good overall condition consistent with limited operational use.

Engine – MAN E2842 E312

• Type: In-line 6-cylinder natural gas engine (spark ignition)
• Rated output: 250 kW
• Speed: 1,500 rpm
• Year of manufacture: 2016
• Serial No.: 724583822457/4 | Job No.: 3072483
• Ambient temperature rating: 25°C | Altitude: 100 m
• Ignition system: Motortech coil-on-plug units (P/N 06.50.104), one per cylinder
• Valve clearance (Ventilspiel): Inlet 0.5 mm / Exhaust 0.5 mm
• Cooling circuit with expansion vessel and pressure gauge visible
• Engine oil filters (dual) accessible on block side

Installation & Ancillaries

• Mounted in an acoustic enclosure with ventilation fan
• Exhaust circuit equipped with motorized actuator valves (Belimo or equivalent) for heat recovery management
• Insulated exhaust manifold and turbocharger visible
• Gas supply pipework with pressure regulation
• Skid-mounted with belt-driven auxiliary drive visible on front end

Condition The unit has seen very limited operational use and presents in good overall condition. Given that the equipment is now over 10 years old, a full mechanical inspection and revision is recommended prior to recommissioning. Sold as-is.

Non-binding information to be verified at purchase.