Metalworking equipment
Iemca Boss
Iemca Boss Loader - Efficiency and Innovation for Your Workshop Discover the Iemca Boss loader, a state-of-the-art solution designed to optimize the machining process and increase the productivity ...
sinker EDM Cormac Magma 2
We offer for sale a Cormac Magma 2 sinker EDM, a machine tool of high precision and reliability, ideal for complex machining on a wide range of conductive materials.
IEMCA Genius 112
Type of loader (automatic, mechanical): Automatic IEMCA Genius 112 bar loader perfect for Fantine Mobili. Perfect machine condition. CE compliant Type of loader (automatic, mechanical): Automatic Length of ba...
ITS TCA 42 Single Spindle Lathe
ITS TCA 42 LATHE Hydraulic drum lock with 4 stations 4 frontal, 2 cross carriages, 3 vertical for a total No. 9 tools. In good condition year 1996
Caser Drill F35
Manufacturer CASER Model F35 Type Transverse stroke 900 mm. Max. diameter 35 mm.
Safag type 127 sharpening machine with hydraulic table
Wheel diameter: 200 mm | Dimensions: 610×95 mm | Voltage: 380V | Weight: 300Kg | Dimensions of the machine: 900×1300 mm
Traub A25
- maximum bar diameter 25mm - tailstock - weight approx. 650 kg - dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - 2 vertical tool holders - 2 horizontal tool holders - Accessories
INDEX 60
Data Sheet Accessories Horizontal and vertical tool holders Frontal spindle tool holders Technical Specifications 2 cross carriages 2 front spindles 2 longitudinal carriages (including 1 with pass)...
IEMCA Maxis 42
Multi-beam feeder with 5 or 6 bar guide tubes, applicable to lathes machining small series with frequent changes of bar diameter. Main features: - stability and quiet operation - bar feed by means ...
CNC MANTEGAZZA FNC 45/23
Data Sheet Accessories tailstock in cycle chip evacuator tool holder Technical Specifications. 2 TURRETS: - Lower turret with 4 positions for turning and deep holes - Upper turret for finishing and...
2000 GAMMA CAMI ER60 CNC
Data Sheet Accessories User manuals Wiring diagrams Tool holder turret THREAD CUTTER / POLYGONATOR Technical Specifications 8-hole front turret 4 carriages on independent slides 1 cross carriage SI...
IEMCA AS 325
Technical Specifications Round bars: Ø 3 - 25 mm | Hexagonal bars: 3 - 22 mm | Max. capacity warehouse: 280 mm | Bar changeover time: 25 sec. (With bars of 3500 mm) mod. 37 | Feed rate: 400 mm / sec. | Supply...
Index C29
Tool turret - drilling depth: max: 70 mm Spindle passage: 29 mm | Turning length: 45 mm | Number of stations: 6 | Turning diameter: 32 mm | Rpm range - spindle: 48-1500 U/min | Links: 24-750 rpm | Total power...
INDEX B60 Single Spindle Lathe
- Turret with 6 stations - Weight about 2200 kg accessories: - grippers - spindle hole: 60 mm | - dimensions lxwxh: 900 x 2250 x H 1600 mm
CAMI B42
Technical Specifications MANDRIN B42 CONTROLLED AXIS TURRET RADIAL SLITS AXIAL SLITS GRIPPER OPENING AND CLOSING GENERAL Three-phase + neutral supply voltage: V 400 C. N. C. numerical control max. ...
Tornos Bechler ENC 164
4 spindle tools With chip conveyor CNC FANUC SERIES O-TT The Tornos Bechler ENC 164 lathe is a numerically controlled (CNC) sliding headstock lathe designed for mass production of precision compone...
Traub TBH 80
The Traub TBH 80 represents excellence in the automatic lathe category, with a well-established reputation for precision, efficiency and durability. This model is ideal for high-speed production an...
IEMCA AS 325
With Carter Weight Loader: Mod.32 - 700 Kg Mod.37 - 750 Kg Mod.42 - 750 Kg Mod.47 - 800 Kg Mod.52 - 900 Kg Mod.57 - 1000 Kg Mod.62 - 1100 Kg Round bars: Ø 3 - 25 mm | Hexagonal bars: 3 - 22 mm | Max. capacity...
INDEX ER 25
Data Sheet Accessories Horizontal and vertical tool holders ORIGINAL INDEX thread cutter/polygonator Prepared for bar loader Technical Specifications TURRET 6 HOLES REVISED ALL ACCESSORIES
IEMCA TAL 65 AUTO Loader
65 x 3170 mm - single-storey warehouse Dimensions 390 x 65 x 130h cm - Weight 1200 kg
Gildemeister GLD 20
- counter spindle - CUCCHI loader - maximum stroke: 160 mm | - sleigh ride: X= 30 mm, Y= 220 mm | - control: FANUC | - maximum turning diameter: 20 mm | - maximum speed: 8,000 1/min
IEMCA Loader TAL 65
TECHNICAL SPECIFICATIONS: Length of bars 3800 mm Maximum bar diameter 65 mm Spindle type single spindle Type: For single-spindle lathes
Schutte SF 26 multi-spindle lathe with Iemca SIR 32 feeder
Used Schutte SF 26, fully functional connected to an IEMCA SIR 32 F charger also fully functional.
Fedek Sn 542
Length of bars 3000 mm Maximum bar diameter 42 mm Spindle type single spindle Type of automatic loader Length x width x height 4000.0 × 1000.0 × 1500.0 Weight 800 kg Excellent condition Conforms to...