FOM Industries ADIR C - OBS

ͻ Side and rear guard fixed. Receding front guard with pneumatic control

ͻ Touch screen console 15'' complete with PC

ͻ CNC controlled interpolating X, Y, and Z

ͻ Axes sliding X,Y,Z on linear guides with high precision

ͻ Axis X movement with servomotor and drive with toothed belt and high pressure reducer

ͻ Z- and Y-axes drive with servomotor and ground ballscrew

ͻ Pneumatic rotation of the work table 0Σ, 90Σ to 180Σ

ͻ Work table height 850 mm

ͻ Electronic equipment and touch screen display with user-friendly interface. FOMCAM Software licence

ͻ No. 4 pneumatic vices that translate along the work table with dual working pressure (low and high) with safety

valves + manual stops (no.2)

ͻ Clamps positioning readout on the work table by CN

ͻ Manual tool change ISO 30 cone with cone tool-holder (6 tools)

ͻ Automatic update of machining parameters when the tool diameter and/or length are modified

ͻ Max tool length (from spindle end): 130 mm

ͻ Electrospindle servo-ventilated motor ISO 30: 3 kW ʹ Electrospindle regulation 1.000/12.000 rpm

ͻ Axis specifications: Axes travel X= 2715 mm, Y= 355 mm, Z= 224 mm

ͻ Axes speed X= 25 m/min, Y= 13 m/min, Z= 11 m/min

ͻ Milling capacity: X = 2675 mm, Y = 250 mm, Z = 120 mm

ͻ Minimum quantity lubrication (MQL) with pure oil

ͻ Set-up for central greasing for recirculating ball-screws and linear guides

ͻ The profile being machined can be greater than the X milling depth (2.675 mm) alternatively using stops on the left

and the right of the machine

ͻ Working pressure: 7 bar

ͻ Work cycle air consumption 43 NL

ͻ Chip bin

ͻ Adjustable feet for machine positioning and anchor brackets to fix the machine to the ground

ͻ Kit for handling machine with forklift

ͻ Installed power 3,5 kW